FSCUT 3000 Fiber Laser Cutting Control System
Secure and Trusted Checkout with:
FSCUT3000S control system is designed for laser tube cutting machine.
- Open-loop control system, Friendess 5th generation motion control algorithms.
- Access encoder feedback in real time, to compare command and machine toolpath.
- Support offset tube center error in production to improve through holes cutting precision.
- Support steel channels cutting.
- Suppport seperate technique for corner cutting.
- Support auto loading/unloading process, cycle production and automatic tube feeding.
- Support all functions of FSCUT2000 system.
- WKB: Wireless hand-held remote * 1
- BMC1805: PCI Control card * 1
- BCL3766: I/O terminal board * 1
- C15-1.5/2.5/4: Servo cable * 4
- C62-2/5/10: 62-pin cable * 1
- C37-2/5/10: 37-pin cable
Download: FSCCT 3000S Manual
I/O Terminal Board
Repetitive Positioning Accuracy
X/Y1/Y2/W axis pulse output, heighest frequency 3MHz
W axis port can be assigned as rotary axis or autofocus unit
X/Y1/Y2 axes port receive encoder feedback, highest sampling frequency 10MHz
8 limit inputs:Positive and negative limit for X/Y1/Y2/W axis
4 origin inputs: X / Y1 / Y2 / W axes origin
15 inputs: 12 are low-level active, 3 inputs can jump-wire switch to high-level active.
TubePro tube cutting software/ CypCut sheet cutting software
32-bit PCI bus, 132MB/S
2 DA outputs: 0~10V，50mA
1 PWM output: 5V/24V for option, precision of 50KHz (0.1%)
8 relay output, load capacity 250V AC/5A, 30V DC/5A
12 thyristor output, load capacity DC 24V/500mA
Humidity: 5%-95%(no condensation)