FSCUT 2000 Fiber Laser Cutting Control System


Secure and Trusted Checkout with:

FSCUT2000S is a open-loop control system specially designed for the sheet metal fabricaton industry, featuring convenient installation, easy use, and fully integrated solutions. FSCUT2000S is the upgrade version from FSCUT2000C, it is suitable for 1500W~6000W fiber laser cutting machines, which is widely used in metal workpiece, kitchen utensils, lamps, cabinets and more.


  • Open-loop control system with Friendess 3rd generation motion control algorithms.
  • Provide dual-Y drive position error detect function.
  • Support up to 5-stage piercing technique, segment and stepping piercing patterns.
  • Support mainstream laser brands on the market.
  • Support basic technique of Fly cut, frog-leap lifting, kerf width compensation, lead line, micro-joint, pre-piercing, film cutting etc.
  • Support advanced functions of find workpiece edge, auto focus control, dual shuttle, break point locate, QR code generation, remnant split, round tube cutting etc.
  • Provide fine cutting technique, smooth start and end in the toolpath cutting.
  • Support intelligent barrier avoidance, laser head frog-leap lifting in production.
  • Support scan QR import drawing, task scheduling, and multi-area production etc.

Hardware Components:

  1. WKB: Wireless hand-held remote * 1
  2. BMC2104: PCIE Motion Control card * 1
  3. BCL3766: I/O terminal board * 1


  1. C15-1.5/2.5/4: Servo cable * 4
  2. C62-2/5/10: 62-pin cable * 1
  3. C37-2/5/10: 37-pin cable

Download: FSCCT 2000S Manual



Control Card


I/O Terminal Board


Trajectory Accuracy


Position Accuracy


Repetitive Positioning Accuracy


Maximum Cutting Speed


Maximum Travel Speed


Maximum AAcceleration


Motor Control Signal

X/Y1/Y2 axes pulse output, maximum frequency 3MHz

W axis port can be assigned as rotary axis or autofocus unit

X/Y1/Y2 axes port receive encoder feedback, highest sampling frequency 10MHz

Dedicated Inputs

8 limit inputs: +/-limit for X/Y1/Y2/W axes

4 origin inputs: X / Y1 / Y2 / W axes origin signal inputs

Common Inputs

15 inputs: low-level active by default option, supports NO and NC mode.

IN3~IN15 can switch between active low and active high


CypOne Laser Cutting Control Software

Interface Type

PCIE bus, X16, 250MB/S

Power Supply

24V DC/2A

Dedicated Outputs

2 DA outputs: 0~10V,50mA

1 PWM output: 5V/24V for option, precision of 50KHz (0.1%)

Common Outputs

8 relay output, load capacity 250V AC/5A, 30V DC/5A

12 thyristor output, load capacity DC 24V/500mA

Work Environment

Temperature: 0-55℃

Humidity: 5%-95%(no condensation)