FSCUT 1000 Fiber Laser Cutting Control System

FSCUT1000 is a low cost solution for samll power fiber laser cutting machines. It is a simplified version of FSCUT2000 system. It integrates motion control and height control unit in one, and is affordable laser cutting control system, mainly used for the cutting of thin metal sheets.

Features:

• Support 2-stage piercing technique.
• Support Raycus, Max and Mars etc. laser source.
• Support Fly-cut, frog-leap, auto-focus adjustment and dual-shuttle functions.
• Capture limit signal in return origin process.

Note:

• Don’t support advanced functions including find workpiece edge and auto-nest etc.
• Don’t support advanced technique functions including cooling point, ring-path for pointed workpiece, bend relif etc.
• Don’t support dual-drive gantry position error alarm and screw pitch error compensation.

Hardware Components:

1. WKB: Wireless hand-held remote * 1
2. BMC1603: PCI Control card * 1
3. BCL4562: I/O terminal board * 1
4. BCL-AMP: Preamplifier * 1

Accessories:

1. C15-1.5/2.5/4: Servo cable * 4
2. C62-2/5/10: 62-pin cable * 1
3. HC-15/HC-20: 4-pin cable * 1
4. LAN-3X/LAN-0.3X/1X/7X/17X: Network cable * 1
5. SPC-140/SPC-180/140B/180B: RF cable * 2

Download: FSCCT 1000S Manual